TF-E8000 EPON Optical Line Terminal

TF-E8000 EPON Optical Line Terminal

TF-E8000 is a high integration and medium capacity cassette EPON OLT designed for operators' access and enterprise campus network. 

It follows the IEEE802.3ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network——based on Ethernet Passive Optical Network (EPON) and China Telecom EPON technical requirements 3.0. TF-E8000 possesses excellent openness, large capacity, high reliability, complete software function, efficient bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction. 

TF-E8000 EPON OLT produced by TUOLIMA provides 8 * downlink 1000Mbps EPON ports, 8 * GE Ethernet ports and 4 SFP 10GE uplink ports. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot of cost for operators for it can support different ONU hybrid networking. 

Looking forward to your orders.

TF-E8000 EPON Optical Line Terminal

Specification of TF-E8000 EPON Optical Line Terminal

Hardware Features

Business Interface

Supply 8 PON Port

8 SFP port for Uplink

10/100/1000M auto-negotiable,RJ45:8pcs for Uplink

Management Ports

Provide 10/100Base-T RJ45 out-band network management port

Provide 1 CONSOLE port

Data exchange

3 layer Ethernet switching, switching capacity 128Gbps, to ensure non-blocking switching

LED Light

RUN、PW instructions system running、power working status

PON1 to PON8 instructions 8 pcs PON port LINK and Active status

GE1 to GE8 instructions 8 pcs GE uplink’s LINK and Active status

XGE1 to XGE4 instructions 4 pcs 10GE uplink’s Link and Active status

Power Supply

220VAC AC: 100V~240V, 50/60Hz  DC:-36V~-72V

Power Consumption 50W


4.6 Kg




300.0mm(L)* 440.0mm(W)* 44.45mm(H)

EPON Function

EPON Standard

Comply with IEEE802.3ah, YD/T 1475-200 and CTC 2.0, 2.1 and 3.0 standard

Dynamic bandwidth allocation


Support fixed bandwidth, guaranteed bandwidth, maximum bandwidth, priority, etc. SLA parameters;

Bandwidth granularity 64Kbps

Security Features

Support PON line AES and triple churing encryption;

Support ONU MAC address binding and filtering;


Support 4095 VLAN additions, transparent transmission, conversion and deletion;

Support 4096 VLAN additions, transparent transmission, conversion and deletion;

Support VLAN Stacking (QinQ)

MAC address learning

Support 32K MAC addresses;

Hardware-based wire-speed MAC address learning;

Based on port, VLAN, link aggregation MAC restrictions;

Spanning Tree Protocol

Support IEEE 802.1d (STP), 802.1w (RSTP) and MSTP Spanning Tree Protocol


Support IGMP Snooping and IGMP Proxy, support CTC controllable multicast;

Support IGMP v1/v2 and v3

NTP protocol

Support NTP protocol

Quality of  Service(QoS)

Support 802.1p priority queue scheduling;

Support SP, WRR or SP + WRR scheduling algorithm;

Access Control Lists


According to the destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, DSCP, TOS, Ethernet frame type, IP precedence, IP packets carried protocol type ACL rules set;

Support the use of the ACL rules for packet filtering;

Support Cos ACL rule using the above settings, IP priority setting, mirroring, speed limit and redirect the application;

Flow Control

Support IEEE 802.3x full-duplex flow control;

Support port speed;

Link Aggregation

Support 8 port aggregation group, each group supports 8 member ports

Port Mirroring

Support the port mirroring of uplink interfaces and PON port


Support  by the alarm log output level shield;

Support for logging output to the terminal, files, and log server


Support four alarm levels (severity, major, minor, and warning);

Support 6 alarm types (communication, quality of service, processing error, hardware equipment and the environment);

Support alarm output to the terminal, log and SNMP network management server

Performance Statistics

Performance statistics sampling time 1 ~ 30s;

Support the 15 minutes performance statistics of uplink interfaces, PON port and ONU user port

Administration  maintenance

Support OLT configuration save, support restore the factory settings;

Support OLT online upgrade;

support ONU offline service configuration and automatically configure ;

Support ONU remote upgrade and batch upgrade;

Network management

Support local or remote CLI management configuration;

Support SNMP v1/v2c network management, support band, in-band network management;

Support the standard of broadcasting industry "EPON + EOC" SNMP MIB and support auto-discovery protocol EoC headend (BCMP);

Support WEB configure management

Open interfaces for third-party network management;

Contact Us Contact Us
Latest News & Blog