FTTH drop cable is light in weight and small in size, and it is suitable for receiving user terminals from FTTH network. There are ribbon fiber or single fiber optional. The non-metallic structures can also be provided.
TUOLIMA can customize different types of optical fibre according to your requirements.
The optical fiber unit is positioned in the center. Two parallel steel wires are placed at two sides. Then the cable is completed with black or color LSZH sheath.
No. of fibers
≦ 0.4dB/km at 1310nm, ≦ 0.3 dB/km at 1550nm
Cable weight (Approx.)
Characteristics of GJXFH-4B Fiber Optic Drop Cable
Optical fiber characteristics (G.657A FIBER)
Mode field diameter
8.6 ± 0.4
125.0 ± 0.7
Core concentricity error
245 ± 5
Coating/cladding concentricity error
Cable cut-off wavelength
Macro-bend loss (1 turn,7.5mm radius)
Proof stress level
FTTH drop fiber optic cable: It is light in weight and small in size, and it is suitable for receiving user terminals from FTTH network. There are ribbon fiber or single fiber optional. Non-metallic structure can also be provided.
Indoor drop cable: Small size, especially suitable for adding lines to existing pipelines. Equipped with slot, optical fiber or jumper can be easily taken out.
Packing material: Non-returnable wooden drum and standard carton.
Both ends of cable are securely fastened to drum and sealed with a shrinkable cap to prevent ingress of moisture.
Cable printing: The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.
The following information shall be marked on the outer sheath of the fiber optic cable at an interval of about 1 meter.
Cable type and number of optical fiber
Month and Year of Manufacture
Drum marking: Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with following:
Manufacture name and logo
Cable type and number of fibers
Gross and net weight